Design by lairdb · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Center Console Trays
Center Console Trays design listed for 2019 Tesla Model 3. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Tesla
- Model
- Model 3
- Year range
- 2019
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
- only Aft Long, aka the garsh Special. Occupies about 3/4 of the available area, good for wrap sunglasses, etc. The larger blue tray in the photos.
- Tray Aft, or Tray Aft and Tray Either Corrected, or 2x Tray Either Corrected. Both will fit, if you turn Tray Either Corrected the correct direction. Either Corrected is the smaller blue tray in the photos.
- Also present: Tray Aft Tall, which works with Tray Either Corrected. Probably only useful to me, but take a look. Translucent white in the photos.
---
20190204: READ THIS. Iama doofus -- I didn't allow for the rib on the compartment lid, which just barely prevents the lid from closing on a Tray Either in the front position. Stand by a day or two for an update with clearance. Tray Aft is fine, though I also expect to add a deep-and-divided version and a semi-deep version. Watch this space for updates, probably in a few days.
---
A pair of center console trays for the Tesla Model 3; an entirely new design
Gridded to allow light to come through and to make it easier to pick things up; pad areas to allow applying felt or rubber feet
(These are tagged as remixes of my own past work and of jonco223's original for findability and respect -- but they're actually developed from scratch from new re-measurement of the center console and a new space model.)
"Tray Aft" (blue in the renderings) is contoured to fit against the aft bulkhead of the center console compartment to maximize space.
"Tray Either" (purple) will fit alone, as a pair with Aft, or as a pair with another Either (though that leaves a little bit of dead space.)
Both should fit pretty snugly; the idea is that they be partially supported by the wings and partially by friction-fit on the sides.
Feedback, makes, etc. welcomed.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 111929b9-529d-4c26-92c3-40c9d379323c
- Part Name
- Center Console Trays
- Slug
- center-console-trays
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Tesla
- Model
- Model 3
- Year
- 2019
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-07T05:54:39.788719+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3388077
- Source Creator Url
- https://www.thingiverse.com/lairdb
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/111929b9-529d-4c26-92c3-40c9d379323c/images/center-console-trays-1_1778133282195_7mvmcn.jpg
- Author
- lairdb
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2019/Tesla/Model%203/center-console-trays
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.