Design by MaikGyver · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Phone Holder with 1" RAM Mount Ball
Phone Holder with 1" RAM Mount Ball design listed for 2001–2005 Mazda MX-5 Miata. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Mazda
- Model
- MX-5 Miata
- Year range
- 2001–2005
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Update 23.05.2026 - Durchmesser wurde um einen Millimeter vergrößert. Jetzt sitzt sie perfekt und fest.
## **Deutsch**
Dies ist ein Remix der Handyhalterung für den **Mazda MX-5 / Miata NB FL**, basierend auf:
**thing:6212012**
Bei diesem Remix wurde die originale Kugelaufnahme angepasst und auf **1 Zoll (1")** vergrößert.
Das entspricht der **Standardgröße der B-Kugel von RAM Mounts** und ermöglicht die Nutzung mit vielen gängigen RAM-Mount-Komponenten.
Die Änderung wurde vorgenommen, damit handelsübliche Halterungen und Arme mit **1"-RAM-Ball-System** direkt verwendet werden können.
### **Änderungen**
* Kugel auf **1" / 25,4 mm** angepasst
* Kompatibel mit der **RAM Mount B-Größe**
* Alle übrigen Maße und die grundlegende Form der Halterung wurden beibehalten
### **Passform**
Die Halterung ist für den **MX-5 / Miata NB FL** gedacht.
Es ist möglich, dass sie **auch beim NA** passt, das wurde jedoch nicht abschließend geprüft.
### **Druckhinweise**
* Gedruckt mit **PETG**
* Gedruckt **ohne Stützstrukturen**
* Erfolgreich gedruckt auf einem **Bambu Lab P1S**
### **Ausbau der Lüftungsdüse**
*Funktioniert am besten mit einer Kreditkarte
*Siehe https://youtu.be/VSKi6i4rBw4
### **Hinweis**
Die Anpassung der Kugel auf 1" wurde mit Unterstützung von **ChatGPT** erstellt.
---
# **Remix: Phone Holder for Mazda MX-5 NB FL / possibly NA with 1" Ball for RAM Mount**
Update 23. May 2026 - The diameter was increased by one millimeter. Now it fits perfectly and securely.
## **English**
This is a remix of the phone holder for the **Mazda MX-5 / Miata NB FL**, based on:
**thing:6212012**
In this remix, the original ball mount was modified and enlarged to **1 inch (1")**.
This matches the **standard RAM Mount B-size ball**, making it compatible with many common RAM Mount arms and accessories.
The modification was made so that standard holders and extension arms using the **1" RAM ball system** can be used directly.
### **Changes**
* Ball size changed to **1" / 25.4 mm**
* Compatible with **RAM Mount B-size**
* All other dimensions and the overall shape of the holder were kept unchanged
### **Fitment**
This holder is intended for the **MX-5 / Miata NB FL**.
It may **also fit the NA**, but this has not been fully verified.
### **Print Notes**
* Printed in **PETG**
* Printed **without supports**
* Successfully printed on a **Bambu Lab P1S**
### **Air Vent Removal**
*Works best with a credit card
*https://www.youtube.com/watch?v=VSKi6i4rBw4
### **Note**
The 1" ball modification was created with the help of **ChatGPT**.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 117b0200-4dd0-42ba-befd-381bbe14f3d7
- Part Name
- Phone Holder with 1" RAM Mount Ball
- Slug
- phone-holder-with-1-ram-mount-ball
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Mazda
- Model
- MX-5 Miata
- Year
- 2001
- Year End
- 2005
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T11:40:37.73405+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7311671
- Source Creator Url
- https://www.thingiverse.com/MaikGyver
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/117b0200-4dd0-42ba-befd-381bbe14f3d7/images/phone-holder-with-1-ram-mount-ball-1_1783510838524_mtxvnq.jpg
- Author
- MaikGyver
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2001-2005/Mazda/MX-5%20Miata/phone-holder-with-1-ram-mount-ball
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.