Design by 20r3mun · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Removable Cup Holder
Removable Cup Holder design listed for 1998–2003 Ford Ranger. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Ford
- Model
- Ranger
- Year range
- 1998–2003
- Submodel
- 60/40 seats
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
do you own a 98-03 Ford Ranger with the 60/40 seats? If so you know the cup holders are not great and are so far they are on a different time zone. I figured that’s something I could solve, so I set off to design a cupholder that would fit specifically in the notch in those 60/40 seats.
And then I thought I could make it even more specific: it fits a 40oz hydro flask because that’s my water bottle. Will it fit others? I've had great success with Trader Joe's 1.25L sparkling water bottles. It fits a Yeti rambler 10oz because that is my favorite coffee cup. Will it fit the 20oz rambler? I don’t know, I don’t have one. If you want to buy me one so I can try. It fits Starbucks paper cups too. And probably other chains.
At this point, I had some room left. Giddy with specificity I made a holder for my mini-condiments (I eat my work lunches in the truck you see). It fits a mini-Tabasco and a mini-tajin. Can you use it for other things? Go ahead and put your sharpie, flashlight, pen… whatever in there! Go nuts and send me the pictures. Come to think of it, it probably works pretty well for slim Jim storage.
I also made an insert to use other cups and bottles when I'm not using the Hydroflask.
The profanity? Well, it is a Ford f#%+¥n’ Ranger
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 161cd3ed-b66e-4f01-b026-a7157d01d137
- Part Name
- Removable Cup Holder
- Slug
- removable-cup-holder
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Ford
- Model
- Ranger
- Year
- 1998
- Year End
- 2003
- Submodel
- 60/40 seats
- Engine
- Not supplied
- Created At
- 2026-05-07T12:55:24.457032+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6340771
- Source Creator Url
- https://www.thingiverse.com/20r3mun
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/161cd3ed-b66e-4f01-b026-a7157d01d137/images/removable-cup-holder-1_1778158525252_ix2d4u.jpg
- Author
- 20r3mun
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1998-2003/Ford/Ranger/removable-cup-holder
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.