Design by JulianoColombo · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Floor mat locker
Floor mat locker design listed for 2008–2013 Hyundai Santa Fe. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Hyundai
- Model
- Santa Fe
- Year range
- 2008–2013
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Esta versão foi impressa em TPU flexível para garantir maior aderência e durabilidade, sem danificar o revestimento do carro.
A parte superior foi modificada para remover qualquer inscrição e garantir um acabamento limpo e discreto.
Impressa em Creality K1 Max com material TPU.
Créditos ao autor original do modelo (GeirS). Esta versão é apenas uma variação estética para quem deseja um acabamento mais limpo na parte superior da peça.
Floor mat locker for the 2008 Hyundai Santa Fe, designed to improve the grip of the original mat holder, which often comes loose.
This enhanced version was printed in flexible TPU to provide better traction and long-lasting performance without damaging the car's flooring.
The top face was modified to remove any text, resulting in a clean and minimal finish.
Printed using a Creality K1 Max with TPU filament.
Credits to the original creator (GeirS). This is just an aesthetic tweak for those who prefer a smoother upside.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 233cc411-43e4-41ea-ade9-834fa772395a
- Part Name
- Floor mat locker
- Slug
- floor-mat-locker-2
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Hyundai
- Model
- Santa Fe
- Year
- 2008
- Year End
- 2013
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-10T21:11:19.619959+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7100036
- Source Creator Url
- https://www.thingiverse.com/JulianoColombo
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/233cc411-43e4-41ea-ade9-834fa772395a/images/floor-mat-locker-2-1_1778447480423_v1woly.jpg
- Author
- JulianoColombo
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 1
- Detail Url
- https://3dcarparts.org/library/2008-2013/Hyundai/Santa%20Fe/floor-mat-locker-2
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.