Design by jbrovage · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Wheel Cover Clip
Wheel Cover Clip design listed for 2010–2012 Ford Fusion. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
- Make
- Ford
- Model
- Fusion
- Year range
- 2010–2012
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
This listing is not offered for sale. Commercial permission or application suitability needs review.
Description
These clips are small, and careless install/removal of the caps can break the clips, preventing them from staying on the car.
This small clip goes inside the bolt-holes where the clips are broken, replacing the clips. They aren't flexible as ABS (needed to survive outdoor car use) so the caps cannot be installed by simply pushing them on. the clips should be installed in the cap, then the cap installed by removing the (usually 3) lug nuts, installing the cap, then re-installing the lug nuts.
Simple print, should be done in ABS for durability.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Cost examples only. This design is not offered for sale; permission or specialist application review is required.
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 2753e0e7-7490-42e3-a9d1-8e3341ef17e3
- Part Name
- Wheel Cover Clip
- Slug
- wheel-cover-clip
- Category
- exterior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Ford
- Model
- Fusion
- Year
- 2010
- Year End
- 2012
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-07T18:50:26.687598+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6044727
- Source Creator Url
- https://www.thingiverse.com/jbrovage
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/2753e0e7-7490-42e3-a9d1-8e3341ef17e3/images/wheel-cover-clip-1_1778179827727_cfoht6.jpg
- Author
- jbrovage
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 1
- Detail Url
- https://3dcarparts.org/library/2010-2012/Ford/Fusion/wheel-cover-clip
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.