Design by Liutprand · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
IV MK4 Facelift Coin Holder Insert
IV MK4 Facelift Coin Holder Insert design listed for 1996–2026 Skoda Octavia. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Skoda
- Model
- Octavia
- Year range
- 1996–2026
- Submodel
- Facelift
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
It is the perfect solution for organizing those loose coins that always end up rolling around, as well as small objects like cards, keys, or shopping cart tokens.
The project includes two files:
Octavia porta monete.stl: The main organizer with dedicated compartments for different coin denominations.
Octavia Cap.stl: A simple but functional lid to close the compartment and keep the contents secure and out of sight.
Printing Instructions and Tips:
To achieve the aesthetic result shown in the photos ("carbon fiber effect" finish), which integrates perfectly with the Octavia's interior:
Print Bed: It is essential to use a textured print bed (often called PEI, with a honeycomb or carbon fiber texture). A smooth bed will produce a smooth, matte surface.
Material: PLA or PETG (PETG is recommended if the car is exposed to high summer temperatures).
Supports: Supports should not be necessary; the design is optimized for standard FDM printing.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 2c877f40-0a3d-480b-b26b-c91c77a22431
- Part Name
- IV MK4 Facelift Coin Holder Insert
- Slug
- iv-mk4-facelift-coin-holder-insert
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Skoda
- Model
- Octavia
- Year
- 1996
- Year End
- 2026
- Submodel
- Facelift
- Engine
- Not supplied
- Created At
- 2026-07-08T06:52:22.330123+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7174394
- Source Creator Url
- https://www.thingiverse.com/Liutprand
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/2c877f40-0a3d-480b-b26b-c91c77a22431/images/iv-mk4-facelift-coin-holder-insert-1_1783493543510_o8umvk.jpg
- Author
- Liutprand
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1996-2026/Skoda/Octavia/iv-mk4-facelift-coin-holder-insert
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.