Design by nils302 · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Dual Gauge Pod
Dual Gauge Pod design listed for 1991–1999 Mitsubishi / Dodge 3000GT / Stealth. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Mitsubishi / Dodge
- Model
- 3000GT / Stealth
- Year range
- 1991–1999
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
The second image shows the factory trim piece removed, the third shows it compared to the Pod Base.stl part. Remove the factory piece, and transfer the metal clip and screw to the printed part.
The fourth image shows how the Pod Base.stl part installs, however recommend you preassemble all the pieces with your gauges (as in the fifth picture) before installing the complete assembly. The Pod Base and Adapter pieces are a pretty snug fit, which is intentional to minimize movement if you bump into the pod. I don't intent to use this setup permanently, but only while I troubleshoot, so feel free to modify the STL files to adjust the setup and make things more rigid if needed.
The order of assembly from front to back is Pod Front, Pod Back, Adapter, Pod Base.
I tucked the vacuum line and wiring in a loom and routed it behind the carpet right behind the pod.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 2da02fb3-9d4d-46dc-be37-422ef3f95d9e
- Part Name
- Dual Gauge Pod
- Slug
- dual-gauge-pod
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Mitsubishi / Dodge
- Model
- 3000GT / Stealth
- Year
- 1991
- Year End
- 1999
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-07T07:50:03.368142+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:5059571
- Source Creator Url
- https://www.thingiverse.com/nils302
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/2da02fb3-9d4d-46dc-be37-422ef3f95d9e/images/dual-gauge-pod-1_1778140204444_s68bkp.jpg
- Author
- nils302
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1991-1999/Mitsubishi%20%2F%20Dodge/3000GT%20%2F%20Stealth/dual-gauge-pod
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.