Design by magictang · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Front Speaker Mount
Front Speaker Mount design listed for 1965 Ford Mustang. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Ford
- Model
- Mustang
- Year range
- 1965
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
My 3D printer is not able to print something that is 10" long so I split the design into two identical halves. The two halves interlock and two #8 sheet metal screws hold the parts secure.
As shown in the pictures, the part interfered with the speaker grill so the design was modified accordingly. The stl file looks slightly different from the pictures due to this mod. If I reprint the parts, I will upload a new set of pictures but I will only do that if I print with another material. I just cut some of the material away with a saw to create my clearance, after taking the pictures. I had other things to do than to reprint!
UPDATE (07/17/25)
I modified the design to make it a single piece which it turns out I could print by turning it to 45 degrees on the build plate. I also turned the speakers so that there are only 3 speaker mounting holes with a single screw holding the speaker tabs that are closest together. There were also some required changes as I assembled my dash for clearance of the speaker grill. I do not have any updated pictures of the printed part but there is a png of the design. I uploaded the 3mf file this time so I hope that works. I don't think that option was available when I first uploaded the design.
UPDATE (07/18/25)
I deleted the 3mf file I uploaded yesterday because it was brought to my attention that someone is selling these parts on Etsy without attribution. Sorry if you need this updated design but I did not want the updated file to be available to them since the original stl file would not permit the grill to be installed properly. So anyone purchasing this on Etsy will not get a functional part! Again, sorry for any inconvenience.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 34564082-45cb-49ed-bcfc-de4d8483adb1
- Part Name
- Front Speaker Mount
- Slug
- front-speaker-mount
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Ford
- Model
- Mustang
- Year
- 1965
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-03T23:50:07.784175+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6595947
- Source Creator Url
- https://www.thingiverse.com/magictang
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/34564082-45cb-49ed-bcfc-de4d8483adb1/images/front-speaker-mount-1_1777852208571_ao5y1w.jpg
- Author
- magictang
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 3
- Detail Url
- https://3dcarparts.org/library/1965/Ford/Mustang/front-speaker-mount
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.