Design by jsrich69 · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Dash Phone Mount Extension
Dash Phone Mount Extension design listed for 2007–2018 Jeep Wrangler. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Jeep
- Model
- Wrangler
- Year range
- 2007–2018
- Submodel
- JKU
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
You will need:
(4) 6mm x 35mm carriage or hex head screws
(4) four 6mm wing nuts
I used a Steelie magnetic ball mount for the phone found here: https://www.amazon.com/Nite-Ize-Original-Steelie-Mount/dp/B00BAQKRHY/ref=sr_1_3?keywords=magnetic+ball+phone+mount+car&qid=1552431993&s=gateway&sr=8-3, but you can use pretty much any of this style magnetic phone mount.
** MAKE SURE YOU PRINT THIS WITH ABS or PETG!! PLA cannot withstand the temperatures that are likely to occur in the dash of a vehicle.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 349e6b60-4dd1-426b-86fc-94683327b881
- Part Name
- Dash Phone Mount Extension
- Slug
- dash-phone-mount-extension
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Jeep
- Model
- Wrangler
- Year
- 2007
- Year End
- 2018
- Submodel
- JKU
- Engine
- Not supplied
- Created At
- 2026-05-06T04:36:59.400031+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3488275
- Source Creator Url
- https://www.thingiverse.com/jsrich69
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/349e6b60-4dd1-426b-86fc-94683327b881/images/dash-phone-mount-extension-1_1778042220622_6os6ie.jpg
- Author
- jsrich69
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2007-2018/Jeep/Wrangler/dash-phone-mount-extension
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.