Design by LiveFromNewYawk · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Dual USB Port Plate
Dual USB Port Plate design listed for 2003 Honda Civic. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Honda
- Model
- Civic
- Year range
- 2003
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
I modified this switch plate so that you can have 2 USB's looking factory fresh in your 20 year old Honda. I wrapped the USB plugs in electrical tape to hold it into place, which also helps give extra strength to the clips so they don't snap as easily. Afterwards I used hot glue to really anchor the USBs down to the middle section. I'm putting this into an 03 Honda Civic but I'm sure it will work for a lot of different Hondas. The power converter linked is strong enough to power a raspberry pi in case you were thinking of using OpenAuto Pro.
I also made a version where the USB's are turned 90 degrees in case your plates are orientated differently. The most important part is gluing the USB's into it so you cant push them into your car. I used hot glue from the back, that way it can be removed if necessary.
The latest version of the "long ways" file is fully solid, because the clips broke the first time I tried to install it. Now it sits nice and snug ;)
<h3>2 USB DC-DC Converter:</h3>
https://www.amazon.com/gp/product/B07T2YFG9M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
<h3>T- tap wire connectors:</h3>
https://www.amazon.com/gp/product/B07114RK67/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 34ae0b96-1dbc-4720-bba2-abbd5fbbf437
- Part Name
- Dual USB Port Plate
- Slug
- dual-usb-port-plate
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Honda
- Model
- Civic
- Year
- 2003
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-04T08:08:58.943483+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:4829066
- Source Creator Url
- https://www.thingiverse.com/LiveFromNewYawk
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/34ae0b96-1dbc-4720-bba2-abbd5fbbf437/images/dual-usb-port-plate-1_1777882139884_ey2ei0.jpg
- Author
- LiveFromNewYawk
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2003/Honda/Civic/dual-usb-port-plate
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.