Design by subnetangel · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Ipad Mini 4 Slider
Ipad Mini 4 Slider design listed for 2006–2022 Toyota FJ Cruiser. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Toyota
- Model
- FJ Cruiser
- Year range
- 2006–2022
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
#### Build and final product:
For build images see this http://www.fjcruiserforums.com/forums/member-build-ups/709114-fj-tonka-project.html#post9029202
##### Updated V2:
Here I made some adjustments for better fit and and included the holed to add the N52 magnets to help hold the iPad in the slider
##### Update V3:
I made further mods, after prototyping V1, realized it was missing some aspects that could be improved.
- I added some tabs to help glue it to the FJ radio/air conditioning bezel
- added extended flaps to make sure that the radio is encased while not using an iPad
- Allowed .8 mm for the iPad to fit snug but still slide, V1 has 2 MM of spacing it caused the iPad to fit too loose and could fall out.
##### Update V6:
I have made some minor artifact fixes that showed up before printing
Any suggestion let me know
### Accessories:
- Magnets: https://www.etsy.com/transaction/1292687646
- Rapid USB Car Charger: http://a.co/dTd4bhP
- Auto Car Trunk Standard Blade Fuse kit: http://a.co/cwL0CDR
- DEDC Fuse Holder: http://a.co/4gktd
- WEN 2305 Rotary Tool Kit with Flex Shaft: http://a.co/9SczqK5
- Primer
- Automotive interior paint color - whatever you want
- Sand paper : 100, 120, 220, 320, 400 and 600 Grit
##### Amazon Shopping list: http://a.co/9OQQ5P0
If you want a true Car Slider I recommend what the pros use: https://soundmanca.com/products/ipad-mini-4-float-mount-kit
A shoutout to @seawitch4
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 3f5a23a0-0dfa-447f-81c2-0179e332e701
- Part Name
- Ipad Mini 4 Slider
- Slug
- ipad-mini-4-slider
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Toyota
- Model
- FJ Cruiser
- Year
- 2006
- Year End
- 2022
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T08:05:12.528801+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:2393830
- Source Creator Url
- https://www.thingiverse.com/subnetangel
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/3f5a23a0-0dfa-447f-81c2-0179e332e701/images/ipad-mini-4-slider-1_1783497915022_0o0ctg.jpg
- Author
- subnetangel
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2006-2022/Toyota/FJ%20Cruiser/ipad-mini-4-slider
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.