Design by Spektyr · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Shopping Bag Hook
Shopping Bag Hook design listed for 2018 Honda Fit. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Honda
- Model
- Fit
- Year range
- 2018
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
My personal opinion: designing them as attached pairs doesn't make sense. That part was flimsy and broke easily. It served only to prevent the hooks from rotating on the headrest shaft which isn't a problem/concern. They also serve to make sure that they only fit on the right/left headrest and not the narrower center one. It also made printing take longer.
I also didn't want it to be as tall, since I don't like the headrests being up and in my field of view.
So I took the model, chopped half the passenger-side hook off, mirrored it to make it "whole", and then squashed it vertically by 50%. This flattened the hook too much, so I took the original hook and grafted it on.
I did all this using my wildly amateurish copy/paste skills, so when you look at the model it looks like crap. Sorry. It does print nicely.
The result is that these fit the shafts nicely - they slide easily so the headrest can go up/down and the hooks won't "stick" in place. But there's no extra "play" in the fit, so they don't rattle. Provided you're reasonably sane about what you hang on them (not bricks, gallons of milk, etc.) they should hold up quite well to normal use.
All credit to the original designer - I just hacked it up and glued it together digitally.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 4d32134a-3e51-4c7d-990e-5d888e905662
- Part Name
- Shopping Bag Hook
- Slug
- shopping-bag-hook
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Honda
- Model
- Fit
- Year
- 2018
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-05T04:23:21.25039+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:4170062
- Source Creator Url
- https://www.thingiverse.com/Spektyr
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/4d32134a-3e51-4c7d-990e-5d888e905662/images/shopping-bag-hook-1_1777955001903_6o71dq.jpg
- Author
- Spektyr
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2018/Honda/Fit/shopping-bag-hook
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.