Design by 3DprintedSpyder · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Engine Lid Prop Clip Retainer
Engine Lid Prop Clip Retainer design listed for 2000–2005 Toyota MR2 Spyder. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
- Make
- Toyota
- Model
- MR2 Spyder
- Year range
- 2000–2005
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
This listing is not offered for sale. Commercial permission or application suitability needs review.
Description
Toyota MR2 / MRS 1999-2007
_Original part no.:_ 90959-01136
Custom supports (marked in red), should be able to break away after print.
If You having issue printing custom supports, feel free to use second file without them.
_Test printed on:_
Prusa i3 MK3 @ Prusa Mini+
_Disclaimer:_ This is __NOT__ original part. It's been (re)design to match OEM part with my best ability. It's been tested and fitted to my car (MR2 2001).
_Instagram:_ [@SYBAgarage](https://www.instagram.com/syba.garage/)
_#SYBAgarage_
_#SYBAprints_
_#3DprintedSpyder_
_#3DpS_
If You like what I'm doing, You can support me [here.](https://www.buymeacoffee.com/sybagarage)
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Cost examples only. This design is not offered for sale; permission or specialist application review is required.
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 500ae39d-2123-4793-8f7d-7110ac36198a
- Part Name
- Engine Lid Prop Clip Retainer
- Slug
- engine-lid-prop-clip-retainer
- Category
- exterior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Toyota
- Model
- MR2 Spyder
- Year
- 2000
- Year End
- 2005
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T09:23:18.709767+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:5136966
- Source Creator Url
- https://www.thingiverse.com/3DprintedSpyder
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/500ae39d-2123-4793-8f7d-7110ac36198a/images/engine-lid-prop-clip-retainer-1_1783502600235_yqsxpd.jpg
- Author
- 3DprintedSpyder
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 3
- Detail Url
- https://3dcarparts.org/library/2000-2005/Toyota/MR2%20Spyder/engine-lid-prop-clip-retainer
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.