Design by MR2Jaden · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Doors Off Mirror Mount
Doors Off Mirror Mount design listed for 2023 Jeep Wrangler. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
- Make
- Jeep
- Model
- Wrangler
- Year range
- 2023
- Submodel
- Rubicon
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
However, I hate using hardware when I can really just design threaded 3D printed objects that will scratch up my paint a bit less, so I remixed the mirror portion to have threads and then created a threaded knob that I pass up through the bottom of the door hinges and thread into the mirror mounts. As shown at the Printables link, these guys were originally designed to accommodate these cheap blind spot mirrors from Walmart (https://www.walmart.com/ip/Auto-Drive-RV-and-Truck-Adjustable-Blind-Spot-Mirror-Universal-Fit-Black/659772450?fulfillmentIntent=Pickup&from=/search). Since I made these in a hurry, I mocked up the driver's side mirror and then just flipped it, so you'll notice the driver's mirror bolt threads in the normal way but the passenger's threads in the opposite direction. You want to use a very sturdy infill on the knobs, I used 90% and they're holding well. I have tested these on my 2023 Jeep Wrangler Rubicon JL two door and they work for me, but I only have the one Jeep so I cannot say these will work for the JK or the TJ or the YJ or any other generation, but they very well could. If anyone wants to test out other generations of Jeep, post your findings in the comments.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 5cd18860-3724-4d61-95d1-af64fb3e42eb
- Part Name
- Doors Off Mirror Mount
- Slug
- doors-off-mirror-mount
- Category
- exterior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Jeep
- Model
- Wrangler
- Year
- 2023
- Year End
- Not supplied
- Submodel
- Rubicon
- Engine
- Not supplied
- Created At
- 2026-04-29T06:06:28.151025+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7124507
- Source Creator Url
- https://www.thingiverse.com/MR2Jaden
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/5cd18860-3724-4d61-95d1-af64fb3e42eb/images/doors-off-mirror-mount-1_1777442799957_5x61en.jpg
- Author
- MR2Jaden
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2023/Jeep/Wrangler/doors-off-mirror-mount
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.