Design by wehooper4 · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Reverse Light Bulb Adapter
Reverse Light Bulb Adapter design listed for 2005–2009 Subaru Legacy. Listed category: lighting. Verify dimensions, fitment and material suitability before printing.
- Make
- Subaru
- Model
- Legacy
- Year range
- 2005–2009
- Submodel
- Outback Wagon
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
This puts the LED's at the same optical center as an upgrade "ERD" bulb. I haven't checked them vs standard 921 bulbs.
For the clip in tabs you'll need to print with support enabled. There is no stopper on rotation, so you'll have to be careful not to over rotate the adapter in the housing.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 65eb449d-5ba1-44cd-9c3a-e0a8db7734ac
- Part Name
- Reverse Light Bulb Adapter
- Slug
- reverse-light-bulb-adapter
- Category
- lighting
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Subaru
- Model
- Legacy
- Year
- 2005
- Year End
- 2009
- Submodel
- Outback Wagon
- Engine
- Not supplied
- Created At
- 2026-05-06T06:20:37.098862+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:2353034
- Source Creator Url
- https://www.thingiverse.com/wehooper4
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/65eb449d-5ba1-44cd-9c3a-e0a8db7734ac/images/reverse-light-bulb-adapter-1_1778048438019_h9lv94.jpg
- Author
- wehooper4
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2005-2009/Subaru/Legacy/reverse-light-bulb-adapter
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.