Design by Griderz · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Cubby Phone Holder
Cubby Phone Holder design listed for 2010–2024 Toyota 4Runner. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Toyota
- Model
- 4Runner
- Year range
- 2010–2024
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
The goal was to create a simple mount that keeps your phone accessible while driving without blocking the cupholders.
The back of the phone holder is intentionally open to allow MagSafe accessories such as wallets or battery packs to remain attached when placing the phone in the mount.
Current Design
Features included in this design:
Phone holder
Mount designed to fit the factory cubby location
Open back for MagSafe compatibility
Fitment in the cubby works fairly well but the design could definitely use refinement.
Known Issues
This design is not perfect yet and I am sharing it early so others can help improve it.
Current issues include:
Base may tilt forward depending on phone weight
Phone holder can loosen at the pivot
Overtightening the screw can break the mount
Overall stability could be improved
Remix Encouraged
If you improve the design please upload your remix and link back to this model so others can benefit.
Potential improvements:
Stronger pivot mount
Better base stability
Adjusted phone viewing angle
Improved screw mounting method
License
This model is released under the Creative Commons Attribution ShareAlike (CC-BY-SA) license.
You are welcome to:
Remix and improve the design
Modify the model
Print and sell prints
Use commercially
Requirements:
Credit the original design
Any remix must be released under the same CC-BY-SA license
The goal is to encourage community improvements while keeping the design open.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 65f2f3fd-09a2-453c-89e9-424b6c1e3138
- Part Name
- Cubby Phone Holder
- Slug
- cubby-phone-holder
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Toyota
- Model
- 4Runner
- Year
- 2010
- Year End
- 2024
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-04T09:51:29.13432+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7312334
- Source Creator Url
- https://www.thingiverse.com/Griderz
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/65f2f3fd-09a2-453c-89e9-424b6c1e3138/images/cubby-phone-holder-1_1777888290360_zvwg9f.jpg
- Author
- Griderz
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2010-2024/Toyota/4Runner/cubby-phone-holder
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.