Design by Blinkingsun · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
BBS RC Center Cap Wrench (12pt)
BBS RC Center Cap Wrench (12pt) design listed for 2002–2005 Volkswagen Jetta GLI. Listed category: specialty-tools. Verify dimensions, fitment and material suitability before printing.
- Make
- Volkswagen
- Model
- Jetta GLI
- Year range
- 2002–2005
- Submodel
- GLI / 337 GTI
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
I recommend printing at a 0.25mm layer height with a slightly high extruder temperature setting for good layer adhesions. Print with at least 0.8mm wall thickness an a 25% infill. I printed with extra wide infill line thickness for extra strength and 1mm top/bottom thickness. It's very solid and worked great at taking off the center caps of a project car which I had picked up with a blown motor which had been sitting for over four years without the wheels coming off. It was designed with an extra long and raised handle to give clearance against the spokes for turning and because of this, you will need to print it with supports.
If there is demand for it, I will make more versions with 337, VW or any other logo (or no logo) on the handle.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $21.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $21.50 | General-purpose candidate; heat and creep need review. |
| ASA | $23.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $22.50 | Enclosed printing; review application and dimensions. |
| TPU | $26.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $26.00 | Moisture, tolerances and application require review. |
| PA-CF | $28.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 6684338a-5716-45fe-807a-45b41ccf472b
- Part Name
- BBS RC Center Cap Wrench (12pt)
- Slug
- bbs-rc-center-cap-wrench-12pt
- Category
- specialty-tools
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Volkswagen
- Model
- Jetta GLI
- Year
- 2002
- Year End
- 2005
- Submodel
- GLI / 337 GTI
- Engine
- Not supplied
- Created At
- 2026-05-09T07:13:46.711798+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3643313
- Source Creator Url
- https://www.thingiverse.com/Blinkingsun
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/6684338a-5716-45fe-807a-45b41ccf472b/images/bbs-rc-center-cap-wrench-12pt-1_1778310827426_ja933f.jpg
- Author
- Blinkingsun
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2002-2005/Volkswagen/Jetta%20GLI/bbs-rc-center-cap-wrench-12pt
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.