Design by Krisrob · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Headlight Dust Cover
Headlight Dust Cover design listed for 2006–2018 Mercedes-Benz Sprinter. Listed category: lighting. Verify dimensions, fitment and material suitability before printing.
- Make
- Mercedes-Benz
- Model
- Sprinter
- Year range
- 2006–2018
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
According to the manufacturer, this part should fit also to:
- AUDI A3 8P 08-
- VW BEETLE
- VW CRAFTER 06-13
- VW GOLF VI
- VW JETTA
- VW TIGUAN
- BMW 5 F10
- BMW 5 F11
- BMW 3 F20
- MERCEDES E CLASS W211
- MERCEDES E CLASS W212
- MERCEDES C CLASS W204
- MERCEDES SLK CLASS W171
- MERCEDES S CLASS W222
- MERCEDES B CLASS W246
- MERCEDES CLA CLASS W117
- MERCEDES SPRINTER W906
- CITROEN C6
- OPEL ZAFIRA C
- SKODA OCTAVIA III 5E
- MINI COOPER R56
It fits perfectly in the place of an old one and has an additional grip to help with tightening.
It only needs a Seal to give some weatherproofing. I have used a PVC flat foam seal, but anything foam or rubber will work.
For the last year, it did not break or leak.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 6d1368e0-27e5-4b21-8076-a9cebe592912
- Part Name
- Headlight Dust Cover
- Slug
- headlight-dust-cover
- Category
- lighting
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Mercedes-Benz
- Model
- Sprinter
- Year
- 2006
- Year End
- 2018
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-04T00:01:06.18101+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6209419
- Source Creator Url
- https://www.thingiverse.com/Krisrob
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/6d1368e0-27e5-4b21-8076-a9cebe592912/images/headlight-dust-cover-1_1777852866829_2w8rge.jpg
- Author
- Krisrob
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2006-2018/Mercedes-Benz/Sprinter/headlight-dust-cover
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.