Design by Prospect3dlab · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Handbrake Hole Plug
Handbrake Hole Plug design listed for 2015 Ford Fiesta. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Ford
- Model
- Fiesta
- Year range
- 2015
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
ETH: 0xc3332e495F1dcA93Aa1c111Cc68e710a64Eaac51
DOGE: DBs37DfixdWaMTrZrbZ3qVDwSPYhkn8Uxe
BTC: bc1qqf56wrcfezul5d2weqfce6dvrw6a7gz29gpl2r
Couple of guys here posted their designs, but after a while they took it down and wanted some money for it. I needed this for my Fiesta so i designed it, measure it and now its doing its job very well. My fiesta is 2015, but i can imagine it will work on many more models. If you print it and it works on your model, comment what year model do you have.
Print flat, no support. Use double tape or super glue to fasten it in the hole. I used super glue, it works well. Do this while handbrake is in upper position and make sure black hole doesnt swallow it (mine did, i needed to print it 2 times :D ). Depending on your printer, you will need to maybe enlarge it or shirink it for a couple of percents to have snug fit. Mine was good at 1:1...
If you want to thank me, share my model in relevant groups :)
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 767358d1-8f0a-4eca-a89c-8dd583fd2b66
- Part Name
- Handbrake Hole Plug
- Slug
- handbrake-hole-plug
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Ford
- Model
- Fiesta
- Year
- 2015
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-06T06:51:42.539327+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:5326908
- Source Creator Url
- https://www.thingiverse.com/Prospect3dlab
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/767358d1-8f0a-4eca-a89c-8dd583fd2b66/images/handbrake-hole-plug-1_1778050304275_jutlpo.jpg
- Author
- Prospect3dlab
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2015/Ford/Fiesta/handbrake-hole-plug
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.