Design by Volvo_things · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Tail Light Mounting Hook
Tail Light Mounting Hook design listed for 2002–2009 Kia Sorento. Listed category: mounts-brackets. Verify dimensions, fitment and material suitability before printing.
- Make
- Kia
- Model
- Sorento
- Year range
- 2002–2009
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Este gancho fue diseñado para sostener el faro trasero del Kia Sorento MK1 (2002–2009). Cada faro utiliza dos de estos ganchos, y es común que se rompan con el tiempo. Al ser una pieza difícil de conseguir en el mercado, esta solución impresa en 3D resulta práctica, económica y efectiva.
Es una pieza indispensable, ya que ayuda a mantener firmemente en su lugar un componente costoso como lo es el faro trasero. Se recomienda imprimir en pares simétricos (dos para cada lado del vehículo).
Fácil de imprimir y muy útil para mantener tu Sorento en condiciones.
🎁 Si este diseño te resultó útil, considerá colaborar conmigo invitándome una cerveza 🍺 en este link: https://buymeacoffee.com/carlosheil4
------
Rear Tail Light Mounting Hook – Kia Sorento MK1
This hook is designed to hold the rear tail light in place on the Kia Sorento MK1 (2002–2009). Each tail light requires two of these hooks, and they tend to break over time. Since replacements are hard to find, this 3D-printed version offers a practical, low-cost solution.
It's an essential part to secure the tail light properly—especially considering how expensive these lights can be. Make sure to print mirrored pairs for installation on both sides of the vehicle. (Two per side.)
Easy to print and very useful to keep your Sorento in top shape.
🎁 If you found this design helpful, consider supporting me by buying me a beer 🍺 here: https://buymeacoffee.com/carlosheil4
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 7e82e674-ae88-4c0c-ada8-7edd4770258d
- Part Name
- Tail Light Mounting Hook
- Slug
- tail-light-mounting-hook
- Category
- mounts-brackets
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Kia
- Model
- Sorento
- Year
- 2002
- Year End
- 2009
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-10T20:37:46.795235+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7032979
- Source Creator Url
- https://www.thingiverse.com/Volvo_things
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/7e82e674-ae88-4c0c-ada8-7edd4770258d/images/tail-light-mounting-hook-1_1778445467457_lf2kfx.jpg
- Author
- Volvo_things
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2002-2009/Kia/Sorento/tail-light-mounting-hook
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.