Design by 3dsokol · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
card reader fix position 2
card reader fix position 2 design listed for 1994–2015 Renault Laguna. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Renault
- Model
- Laguna
- Year range
- 1994–2015
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
I did need to clip the plastic part a bit because it did not fit perfectly (where the screw goes to tighten the PCB).
Applied some strong glue and it fixed the issue of the card not being detected.
I also needed to cut the plastic housing which I could later not fit on the PCB. As I already glued everything together I could not repair it. SO PLEASE CHECK BEFORE GLUING.
For the first replacement fix I used and remix a part from @pberenyi - thanks you helped a lot.
org for postion fix 1:
https://www.thingiverse.com/thing:3466886
my remix:
https://www.thingiverse.com/thing:7105178
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 80c71607-2aee-443f-afe1-e7916246a430
- Part Name
- card reader fix position 2
- Slug
- card-reader-fix-position-2
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Renault
- Model
- Laguna
- Year
- 1994
- Year End
- 2015
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T13:01:09.946742+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7105188
- Source Creator Url
- https://www.thingiverse.com/3dsokol
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/80c71607-2aee-443f-afe1-e7916246a430/images/card-reader-fix-position-2-1_1783515670753_oq312s.jpg
- Author
- 3dsokol
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 3
- Detail Url
- https://3dcarparts.org/library/1994-2015/Renault/Laguna/card-reader-fix-position-2
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.