Design by SuShade33 · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Cubby 7inch screen holder
Cubby 7inch screen holder design listed for 2005 Nissan 350Z. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
- Make
- Nissan
- Model
- 350Z
- Year range
- 2005
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
This was originally a remix but it seems like the original model is not on Thingiverse anymore. Please make me aware of it, if its still online. I dont want to steal his stuff and not credit him.
The model is for a 350Z pre facelift interior, no idea how this fits in the facelift interior. You can melt in some thread inserts in the holes, then mount a screen. The mounting is somewhat whacky, you will have to find your own solution. I did some bracket out of scrap acrylic glass pieces, which I have molten into shape, then drilled some holes. The fitment is nowhere near perfect, but it works.
You can search for a screen on Aliexpress, pretty much any 7 inch screen that shows a Raspberry Pi on its back and has mounting holes in all 4 corners should fit. I attached a sample picture.
I am using a Raspberry Pi with OpenAutoPro, though thats discontinued at this moment. You can search for alternatives, though I have found none. For power delivery, I used this PCB: https://www.tindie.com/products/picotouch/raspberry-pi-automatic-onoff-v30-new-version/ . But thats also not being sold right now, you might find an alternative or just build it on your own with a 12V Relay.
Honest to god, I cannot find the STL for those white arms I have on my model. You need those to attach the screen holder to the center console. I dont know why I dont have them anymore, I really must have deleted them since this project is 2 years back now.
You can fabricate your own arms pretty easily with some acrylic glass. Just cut it to size and heat it with a lighter, then bend it to shape, then drill some holes in it. Or design your own arms, but that's quite some work.
Also I wanted to upload the .step file but it's bigger than 600mb and it just won't upload to thingiverse, not even after letting it sit for 2 hours.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 84cd21de-05fb-4f17-ac0c-13f0032ed625
- Part Name
- Cubby 7inch screen holder
- Slug
- 7inch-screen-holder
- Category
- exterior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Nissan
- Model
- 350Z
- Year
- 2005
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2025-10-09T21:27:17.0326+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6960591
- Source Creator Url
- https://www.thingiverse.com/SuShade33
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/84cd21de-05fb-4f17-ac0c-13f0032ed625/images/7inch-screen-holder-1_1760045240358_fniudj.jpg
- Author
- SuShade33
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2005/Nissan/350Z/7inch-screen-holder
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.