Design by MakerKidsCO · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Ashtray Cup Holder
Ashtray Cup Holder design listed for 1987 Porsche 924. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Porsche
- Model
- 924
- Year range
- 1987
- Submodel
- 924S
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
inb4 "It's a driver's car it doesn't need cup holders!!!11!one1"
I like going through drive-throughs, I wanted a cup holder.
This project attempts to remedy both problems. It comes in two parts: the drop-in replacement "plug" for the OEM ashtray and the cup holder attachment. The cup holder slides into the ashtray plug when you need/want its functionality, and slides out to be stored in the door pocket when it's not needed. The cup holder hole is sized to nicely fit the small-sized drink cups at a few of my favorite fast food joints. You may have to adjust the hole diameter in FreeCAD to make it work for you.
I know it works on the 1987 Porsche 924S, but I can't confirm its functionality on cars I don't own. I think it would work on all of the 924/944 family, but I'm not totally sure. If you have one of those cars, let me know in the comments if/how it works!
Attached are the two components you need, plus the FreeCAD files for both the standard parts and a few options. 924ashtraypocket.fcstd is the plug without cup holding functionality, and 924ashtrayblank.fcstd is a blank plug for you to modify or use however you want.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 86568cc7-b8e1-4b10-94e4-048cd4886b84
- Part Name
- Ashtray Cup Holder
- Slug
- ashtray-cup-holder
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Porsche
- Model
- 924
- Year
- 1987
- Year End
- Not supplied
- Submodel
- 924S
- Engine
- Not supplied
- Created At
- 2026-05-07T06:05:29.31106+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:1532485
- Source Creator Url
- https://www.thingiverse.com/MakerKidsCO
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/86568cc7-b8e1-4b10-94e4-048cd4886b84/images/ashtray-cup-holder-1_1778133930211_gcjd9o.jpg
- Author
- MakerKidsCO
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1987/Porsche/924/ashtray-cup-holder
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.