Design by osunick · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Wireless Charging Tray
Wireless Charging Tray design listed for 2012 Porsche 911. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Porsche
- Model
- 911
- Year range
- 2012
- Submodel
- Boxster/Cayman
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Used with Anker 15W PowerWave Alloy Charging Pad:
https://smile.amazon.com/Anker-Wireless-Charger-Fast-Charging-Adapter/dp/B07YD77RKC
Right angle USB-C adapter (used with six inch cable that is barely long enough)
https://smile.amazon.com/Adapter-Cellularize-Extender-Extension-Nintendo/dp/B0882RJRQS
You will also need at least a six inch USB-C adapter and a 12V USB-c charger that supports Power Delivery in the accessory socket.
There are two components, the main tray, and a tpu mat to place under it to prevent any scratches. Remove the rubber factory liner before installing both.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 89fadc6c-82c2-4c74-b7e4-aebf1cfe6812
- Part Name
- Wireless Charging Tray
- Slug
- wireless-charging-tray
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Porsche
- Model
- 911
- Year
- 2012
- Year End
- Not supplied
- Submodel
- Boxster/Cayman
- Engine
- Not supplied
- Created At
- 2026-07-08T10:41:38.207382+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:4857908
- Source Creator Url
- https://www.thingiverse.com/osunick
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/89fadc6c-82c2-4c74-b7e4-aebf1cfe6812/images/wireless-charging-tray-1_1783507298711_nummeg.jpg
- Author
- osunick
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2012/Porsche/911/wireless-charging-tray
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.