Design by alebucci · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
trunk clip
trunk clip design listed for 2015 Jeep Renegade. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Jeep
- Model
- Renegade
- Year range
- 2015
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Even though there are many places to tie my luggage, I did not like that the ones at the top position on each side of the trunk do not allow attaching a snap hook like the other sides, so I decided to design a new hook that does the job.
Installing the clip is very easy (you can see in the attached photos): you have to rotate the old clip 90 degrees with pliers (clockwise or counterclockwise doesn't matter), extract the clip, and insert the printed one by rotating it again with pliers.
Sorry for my bad English... maybe you can translate the Italian description below ;)
I redesigned these trunk hooks because I did not like that in the area where it was most useful to have a hook for carabiners or similar, they had placed a different clip from all the others.
Disassembly is very simple: use pliers to grip the old clip and rotate it 90 degrees (clockwise or counterclockwise doesn't matter), extract the old clip, and insert the printed one by rotating it again 90°.
I post only my own original projects... if you like my ideas, buy me a coffee via the designer tip ;)
Thank you
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 9138f0eb-317b-48d3-b5e5-879d3e90c907
- Part Name
- trunk clip
- Slug
- trunk-clip
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Jeep
- Model
- Renegade
- Year
- 2015
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-07T10:40:37.976799+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6402442
- Source Creator Url
- https://www.thingiverse.com/alebucci
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/9138f0eb-317b-48d3-b5e5-879d3e90c907/images/trunk-clip-1_1783420839268_h02v3g.jpg
- Author
- alebucci
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2015/Jeep/Renegade/trunk-clip
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.