Design by Volvo_things · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Ignition Key Cover
Ignition Key Cover design listed for 1995–2019 Volvo V40. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Volvo
- Model
- V40
- Year range
- 1995–2019
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Esta es una cubierta de reemplazo para la llave de encendido del Volvo V40 MK1, con la inscripción “VOLVO” de un lado y “V40” del otro, en relieve.
La original es de goma y con el tiempo tiende a desgranarse. Esta versión impresa en 3D es mucho más duradera y puede quedar excelente con un poco de terminación.
Recomiendo imprimirla en posición vertical para obtener mayor nitidez en los detalles. Puede imprimirse en PLA, pegar las dos mitades y luego lijar el exterior con lija de grano muy fino para una terminación más prolija.
🎁 Si este diseño te gustó o te fue útil, podés invitarme una cerveza 🍺 en este link: https://buymeacoffee.com/carlosheil4
-----
Ignition Key Cover – Volvo V40 (with “VOLVO” / “V40” lettering)
This is a replacement ignition key cover for the Volvo V40 MK1, featuring raised “VOLVO” text on one side and “V40” on the other.
The original rubber cover tends to degrade over time. This 3D-printed version is more durable and can look great with a bit of finishing.
I recommend printing it vertically for better detail resolution. You can print it in PLA, glue the halves together, and sand the exterior with fine-grit sandpaper for a smoother finish.
🎁 If you found this design useful or just liked it, consider buying me a beer 🍺 here: https://buymeacoffee.com/carlosheil4
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- 9c937565-69d4-415f-9430-fe0cf3129e9e
- Part Name
- Ignition Key Cover
- Slug
- ignition-key-cover
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Volvo
- Model
- V40
- Year
- 1995
- Year End
- 2019
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T13:30:29.267323+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7033498
- Source Creator Url
- https://www.thingiverse.com/Volvo_things
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/9c937565-69d4-415f-9430-fe0cf3129e9e/images/ignition-key-cover-1_1783517429949_y3keoa.jpg
- Author
- Volvo_things
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1995-2019/Volvo/V40/ignition-key-cover
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.