Design by rullx · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Rear Seat Release Handle
Rear Seat Release Handle design listed for 1990 Volvo 240. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Volvo
- Model
- 240
- Year range
- 1990
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
You can find it new, maybe with a lot of other pieces you don't need. To verify just search for "Volvo 3521830", you'll find it! At a cost of 20$ or 18€ to buy that new. Well, it's right, and I recommend to buy an original one.
In case you are not so devote to original pieces you can print this one, and mount yourself!
I really hope it can help!
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
Brand: MakerBot
Printer: MakerBot Replicator (5th Generation)
Rafts: Yes Supports: Yes Resolution: 0,2 mm Infill: 10% Notes: I used a very low infill, because my purpose was just to verify that the piece was correctly designed. I mounted it on the Volvo and it gently fitted and made it's hard work.I would recommend a higher infill, maybe 100% would be the best for a stress oriented piece.
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- aad6c2a4-9b3c-41db-8f0b-eace4495459d
- Part Name
- Rear Seat Release Handle
- Slug
- rear-seat-release-handle
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Volvo
- Model
- 240
- Year
- 1990
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-01-11T19:21:42.986239+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:1959160
- Source Creator Url
- https://www.thingiverse.com/rullx
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/aad6c2a4-9b3c-41db-8f0b-eace4495459d/images/rear-seat-release-handle-1_1768159304854_ueiqv9.jpg
- Author
- rullx
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1990/Volvo/240/rear-seat-release-handle
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.