Design by Shootquinn · Original design · CC0-1.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Automatic shifter cover (jalousie)
Automatic shifter cover (jalousie) design listed for 1997–2012 Saab 9-5. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Saab
- Model
- 9-5
- Year range
- 1997–2012
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
https://www.youtube.com/watch?v=7J9tc6njtPw
The STL files are configured to fit a Saab 9-5 with Automatic Transmission. The Test STL is included in the event you want to fix the car the proper way, including soldering the sport button. The other two STLs can be printed and assembled on the car to save you time and trouble, as well as provide improved functionality over cutting the rubber replacement jalouse that are available online.
Edit 9-15-18: Modified puzzle joint on passenger side to make it stronger. May need more work in the future. Best advise is to put a drop of super glue (taking care to not get it on the display surface) on the passenger side puzzle joint before installing the bezel during the final fit. Video was made before the improvement was made, and the joint did hold up to the testing but the glue was required.
This thing serves as evidence of prior art of a two piece puzzle joint jalousie and is dedicated to the public domain. Derivatives and commercial use are encouraged.
NOTE: DOWNLOAD FILES INDIVIDUALLY BY GOING TO THE FILES PAGE. THERE IS A PROBLEM WITH THE DOWNLOAD ALL FILES BUTTON. THIS IS A KNOWN ISSUE WITH THINGIVERSE.
Source description, under the recorded CC0-1.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- cb8a3ef1-62be-48b9-9d1c-f5c2b354f74c
- Part Name
- Automatic shifter cover (jalousie)
- Slug
- automatic-shifter-cover-jalousie
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Saab
- Model
- 9-5
- Year
- 1997
- Year End
- 2012
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T14:22:07.42616+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3094525
- Source Creator Url
- https://www.thingiverse.com/Shootquinn
- Cc License Code
- CC0-1.0
- Cc License Url
- https://creativecommons.org/publicdomain/zero/1.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/cb8a3ef1-62be-48b9-9d1c-f5c2b354f74c/images/automatic-shifter-cover-jalousie-1_1783520528836_lzbg0y.jpg
- Author
- Shootquinn
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/1997-2012/Saab/9-5/automatic-shifter-cover-jalousie
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.