Design by TheRygr11 · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Switch Panel
Switch Panel design listed for 2015 Subaru WRX STI. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Subaru
- Model
- WRX STI
- Year range
- 2015
- Submodel
- STI
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
There are several versions ranging from a basic plate to cover the area below the radio, to ready to install with switch cutouts. There are split 2 piece versions of each different model for people with smaller printers. For the split version with the switch cutouts, the left side has the tabs to fuse the halves together with glue (see bottom for adhesive I use). The solid plate split model does not have the tabs so I have also included just the tabs in a separate file. They are not required, but make life easier when joining the parts.
As far as mounting. you'll have to get creative. I just lined it up and hot glued the inner edges, but you could make mounting brackets.
Sand and/or fill to make smooth for paint or vinyl (I used 400 grit to finish, and auto-body filler to smooth gap from 2 piece print)
LINKS:
Switches- https://www.amazon.com/gp/product/B01F55SXVC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Adhesive-
https://www.amazon.com/J-B-Weld-50133-Tan-1-Pack/dp/B009EU5ZNO/ref=sr_1_5?crid=37XNWIN55A71K&keywords=jb%2Bweld%2Bplastic%2Bbonder&qid=1572083173&sprefix=JB%2Bweld%2Bplas%2Caps%2C121&sr=8-5&th=1&psc=1
Vinyl wrap-
https://www.amazon.com/gp/product/B01CF3ONIE/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $57.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $59.00 | General-purpose candidate; heat and creep need review. |
| ASA | $69.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $66.00 | Enclosed printing; review application and dimensions. |
| TPU | $85.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $85.00 | Moisture, tolerances and application require review. |
| PA-CF | $99.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- cf8f3d26-444b-4830-a814-20f910cb2398
- Part Name
- Switch Panel
- Slug
- switch-panel
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Subaru
- Model
- WRX STI
- Year
- 2015
- Year End
- Not supplied
- Submodel
- STI
- Engine
- Not supplied
- Created At
- 2026-05-06T06:31:54.568782+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3938501
- Source Creator Url
- https://www.thingiverse.com/TheRygr11
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/cf8f3d26-444b-4830-a814-20f910cb2398/images/switch-panel-1_1778049115842_rzp7ev.jpg
- Author
- TheRygr11
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2015/Subaru/WRX%20STI/switch-panel
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.