Design by ABLomas · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Wheel center cap (no logo) (fits Volvo rims)
Wheel center cap (no logo) (fits Volvo rims) design listed for 1978–2001 Honda Prelude. Listed category: other. Verify dimensions, fitment and material suitability before printing.
- Make
- Honda
- Model
- Prelude
- Year range
- 1978–2001
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
This listing is not offered for sale. Commercial permission or application suitability needs review.
Description
Outer diameter 56mm, height up to "holding circle" 12.3mm. Fits Honda Prelude 15" wheels, Volvo S70 17" 5-spoke rims and few others i know.
I can also upload solidworks model if you want to customize it, on request.
Printed in ABS, holds well, not rattling, but can be removed easy too when needed. If you want it to be almost permanent - print at 101% scale (maybe more, depends on material/shrinkage) and it will be impossible to remove without breaking.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $21.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $21.50 | General-purpose candidate; heat and creep need review. |
| ASA | $23.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $22.50 | Enclosed printing; review application and dimensions. |
| TPU | $26.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $26.00 | Moisture, tolerances and application require review. |
| PA-CF | $28.00 | Filled nylon; abrasive filament and fit need review. |
Cost examples only. This design is not offered for sale; permission or specialist application review is required.
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- d28db077-08b0-484e-828f-dafb98b89c50
- Part Name
- Wheel center cap (no logo) (fits Volvo rims)
- Slug
- wheel-center-cap-no-logo-fits-volvo-rims
- Category
- other
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Honda
- Model
- Prelude
- Year
- 1978
- Year End
- 2001
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T05:31:02.419178+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:2416281
- Source Creator Url
- https://www.thingiverse.com/ABLomas
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/d28db077-08b0-484e-828f-dafb98b89c50/images/wheel-center-cap-no-logo-fits-volvo-rims-1_1783488663432_b1ccwb.jpg
- Author
- ABLomas
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 2
- Detail Url
- https://3dcarparts.org/library/1978-2001/Honda/Prelude/wheel-center-cap-no-logo-fits-volvo-rims
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.