Design by _justbill · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Car Stereo Adapter Trim Bezel
Car Stereo Adapter Trim Bezel design listed for 2011–2011 Subaru Forester. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Subaru
- Model
- Forester
- Year range
- 2011–2011
- Submodel
- 2.5X Premium
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Could potentially work for other Foresters (or even other Subaru's) in the 2009-20016 era, or even remixed to fit other models/years.
Shown printed in RED for demo purposes, I printed the actual unit in black to match the stereo console.
Was planning to use the leftover bracket mounting screws from the original deck to secure it to the new deck but it fit so well that it held in place fine without any screws.
***SIDE NOTE: If you're looking for the wiring connector for this model Subaru, it requires the Metra 71-7552 Radio Wiring Harness or equivalent. You'll also need the iDatalink Maestro ACC-USB2 USB Adapter Cables to connect the built-in USB & AUX ports. And if you want to retain the steering wheel controls, you'll need a separate module for that as well.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- e7506b32-8713-48a2-9453-93deb6541c07
- Part Name
- Car Stereo Adapter Trim Bezel
- Slug
- car-stereo-adapter-trim-bezel
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Subaru
- Model
- Forester
- Year
- 2011
- Year End
- 2011
- Submodel
- 2.5X Premium
- Engine
- Not supplied
- Created At
- 2026-05-06T05:36:24.781066+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:4249731
- Source Creator Url
- https://www.thingiverse.com/_justbill
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/e7506b32-8713-48a2-9453-93deb6541c07/images/car-stereo-adapter-trim-bezel-1_1778045786759_2mide9.jpg
- Author
- _justbill
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2011-2011/Subaru/Forester/car-stereo-adapter-trim-bezel
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.