Design by albeurum · Original design · CC-BY-SA-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Door Stop Clip
Door Stop Clip design listed for 2005 Volkswagen Polo. Listed category: mounts-brackets. Verify dimensions, fitment and material suitability before printing.
- Make
- Volkswagen
- Model
- Polo
- Year range
- 2005
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Este diseño ha sido optimizado para ofrecer una combinación ideal de dureza, resistencia y velocidad de impresión. Se recomienda imprimir el modelo con una inclinación de 45 grados en la cama de impresión. Esta orientación estratégica mejora significativamente la resistencia de la pieza final al alinear las capas de forma más favorable contra las fuerzas que actuará sobre el soporte.
Parámetros de Impresión Recomendados:
Material: PETG
Velocidad de Impresión: 50 mm/s
Orientación de la Cama: 45 grados de inclinación
Notas de Prueba:
Este diseño ha sido probado exhaustivamente en un Volkswagen Polo del año 2005 y se ajusta perfectamente. Los resultados de las pruebas demuestran una excelente durabilidad y funcionalidad.
Description:
This design has been optimized to offer an ideal combination of toughness, strength, and print speed. It is recommended to print the model with a 45-degree tilt on the print bed. This strategic orientation significantly improves the strength of the final part by aligning the layers more favorably against the forces acting on the support.
Recommended Print Parameters:
Material: PETG
Print Speed: 50 mm/s
Bed Orientation: 45-degree tilt
Testing Notes:
This design has been extensively tested on a 2005 Volkswagen Polo and is a perfect fit. Test results demonstrate excellent durability and functionality.
Source description, under the recorded CC-BY-SA-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- e8764c69-3743-41ea-a9ba-73ccb871c451
- Part Name
- Door Stop Clip
- Slug
- door-stop-clip
- Category
- mounts-brackets
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Volkswagen
- Model
- Polo
- Year
- 2005
- Year End
- Not supplied
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-07T09:04:32.574804+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:7008130
- Source Creator Url
- https://www.thingiverse.com/albeurum
- Cc License Code
- CC-BY-SA-4.0
- Cc License Url
- https://creativecommons.org/licenses/by-sa/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/e8764c69-3743-41ea-a9ba-73ccb871c451/images/door-stop-clip-1_1778144673608_r0me88.jpg
- Author
- albeurum
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2005/Volkswagen/Polo/door-stop-clip
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.