Design by 3D_SJON · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Center cap RSI and Williams standard 14 inch rims
Center cap RSI and Williams standard 14 inch rims design listed for 1990 Renault Clio. Listed category: other. Verify dimensions, fitment and material suitability before printing.
- Make
- Renault
- Model
- Clio
- Year range
- 1990
- Submodel
- RSI / Williams
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
After printing with standard settings (fill 30%):
- Sanded it with 120-180 and finally 240 grid sandpaper
- Taped the holding pegs
- Spray painted the cap with filling primer
- Sanded with 240
- Added 2 layers of silver (depending if the filling primer was enough)
- Added 1 coat of clear while the silver was still wet
Last sand with super fine wet sand paper
- profit
Made the clamps the correct size. Its better for fitment to tape them off.
I printed it with the flat side on the bed for the smoothest result
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $21.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $21.50 | General-purpose candidate; heat and creep need review. |
| ASA | $23.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $22.50 | Enclosed printing; review application and dimensions. |
| TPU | $26.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $26.00 | Moisture, tolerances and application require review. |
| PA-CF | $28.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- eba2e20c-9218-4c5e-8886-cbff9c413937
- Part Name
- Center cap RSI and Williams standard 14 inch rims
- Slug
- center-cap-rsi-and-williams-standard-14-inch-rims
- Category
- other
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Renault
- Model
- Clio
- Year
- 1990
- Year End
- Not supplied
- Submodel
- RSI / Williams
- Engine
- Not supplied
- Created At
- 2026-07-08T06:30:02.581919+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:5990201
- Source Creator Url
- https://www.thingiverse.com/3D_SJON
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/eba2e20c-9218-4c5e-8886-cbff9c413937/images/center-cap-rsi-and-williams-standard-14-inch-rims-1_1783492203514_vbvz5q.jpg
- Author
- 3D_SJON
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 1
- Detail Url
- https://3dcarparts.org/library/1990/Renault/Clio/center-cap-rsi-and-williams-standard-14-inch-rims
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.