Design by GRay_111111 · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Speaker Adapter
Speaker Adapter design listed for 2002–2008 Subaru Forester. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Subaru
- Model
- Forester
- Year range
- 2002–2008
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
I fitted (rear) 5.25" and (front) 6.5" Fli speakers (sound much better).
(theres a few similar designs on thingiverse if these are not exact for your needs)
Rears are only 7mm thick - check new speaker clearance - the ones I fitted just touched the grill/panel.
Front are 12mm thick and enabled my Fli speakers to clear the window when wound down, and easily cleared the grill./panel - so you could always scale the thickness up a little in your slicer to increase clearance at the window glass if needed.
Print in ABS to prevent warping in heat (PLA should be fine though I guess).
Photo only shows rears (I forgot to take photos of the fronts!) - same idea for the rears.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- f100cf9e-1c9f-495e-8606-b68cac743294
- Part Name
- Speaker Adapter
- Slug
- speaker-adapter
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Subaru
- Model
- Forester
- Year
- 2002
- Year End
- 2008
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-03T04:08:05.860483+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:2988041
- Source Creator Url
- https://www.thingiverse.com/GRay_111111
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/f100cf9e-1c9f-495e-8606-b68cac743294/images/speaker-adapter-1_1777781288344_lf4ng7.jpg
- Author
- GRay_111111
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2002-2008/Subaru/Forester/speaker-adapter
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.