Design by SlNED · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Wireless Charging Retrofit Holder
Wireless Charging Retrofit Holder design listed for 2014–2023 Audi TT. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Audi
- Model
- TT
- Year range
- 2014–2023
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
Unfortunately my newly acquired Audi TT 8S (FV) does not have a wireless charger installed. So I thought, why not retrofit one :-)
This is easy and done in just a few steps.
1. I bought the original Audi TT inductive charger on Amazon
https://amzn.eu/d/b2KbexQ
2. Print the STL (charging holder)
3. Remove the supports from the back of the printed part.
4. Place the charger into the printed charging holder
5. Store the cables on the back and optionally secure them with tape
6. Remove the silicone mat from the storage compartment
6. Insert the complete part into the charging tray and connect the USB cable to the port marked with USB.
7. Re-insert the silicone mat
DONE
If your Audi TT does not have a storage compartment, you can also retrofit this — simply search on Google for "Audi TT 8S Ladeschale". The current retail price is between 25–35€.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $42.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $43.50 | General-purpose candidate; heat and creep need review. |
| ASA | $50.00 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $48.00 | Enclosed printing; review application and dimensions. |
| TPU | $60.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $60.00 | Moisture, tolerances and application require review. |
| PA-CF | $69.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- f2a002ee-814a-4174-8cfe-62e353c304c7
- Part Name
- Wireless Charging Retrofit Holder
- Slug
- wireless-charging-retrofit-holder
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Audi
- Model
- TT
- Year
- 2014
- Year End
- 2023
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-07-08T05:46:33.654058+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:5913453
- Source Creator Url
- https://www.thingiverse.com/SlNED
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/f2a002ee-814a-4174-8cfe-62e353c304c7/images/wireless-charging-retrofit-holder-1_1783489594509_z066b0.jpg
- Author
- SlNED
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2014-2023/Audi/TT/wireless-charging-retrofit-holder
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.