Design by Stevengineer · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Rearview Mirror Dash Camera Mount Bracket
Rearview Mirror Dash Camera Mount Bracket design listed for 2005–2013 Chevrolet Corvette. Listed category: mounts-brackets. Verify dimensions, fitment and material suitability before printing.
- Make
- Chevrolet
- Model
- Corvette
- Year range
- 2005–2013
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
The plastic piece that attaches the mirror to windshield has a plastic plate that faces forward and covers a pocket. The pocket on my car contained nothing, hopefully the higher trim levels do not have something in their. The cover snaps on and off easily. I first tried to fit the camera in the pocket since it was a nearly perfect fit but I couldn't find a way to plug it in without drilling the back of the pocket. So instead, I 3D printed a part to fit in the pocket with a zip tie going through the printed part and the 2 holes of the mirror mount that the cover snapped into.
Note: For anyone who wants to do this, you much change the lithium battery in the camera out for the capacitor instead. The heat in the sun may cause the battery to fail, swell, or in worst case, catch fire. The capacitor works well but you have to reprogram the camera to turn on and off with power. To control the camera, use either a switched cigarette lighter, power from the radio unit, and a 5V regulator off a switched fuse.
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- f47c5f8e-0d09-45b2-aca2-b3d3b1dab01e
- Part Name
- Rearview Mirror Dash Camera Mount Bracket
- Slug
- rearview-mirror-dash-camera-mount-bracket
- Category
- mounts-brackets
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Chevrolet
- Model
- Corvette
- Year
- 2005
- Year End
- 2013
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-07T05:05:10.312761+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:3841129
- Source Creator Url
- https://www.thingiverse.com/Stevengineer
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/f47c5f8e-0d09-45b2-aca2-b3d3b1dab01e/images/rearview-mirror-dash-camera-mount-bracket-1_1778130311375_iknr4p.jpg
- Author
- Stevengineer
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2005-2013/Chevrolet/Corvette/rearview-mirror-dash-camera-mount-bracket
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.