Design by AlexArmenia · Original design · CC-BY-4.0 · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
Warning Triangle Holder Clip
Warning Triangle Holder Clip design listed for 2001–2005 Audi A4. Listed category: interior. Verify dimensions, fitment and material suitability before printing.
- Make
- Audi
- Model
- A4
- Year range
- 2001–2005
- Submodel
- Not supplied
- Engine
- Not supplied
Source approval status: pending. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
My friends Car (Audi A4 B6) warningtriangle holder broke so i just got on Thingiverse and printed one. But i couldnt find one that was stable enough for my friend. I dont know how he closes his trunk but it did pop out every times.
So i decided to look for new solutions. I saw one guy on ebay that sold the 3D printed clip and the other thing with a screw and a washer for 15€. I thought that it is to much money for a 3D printed part that size so i design my own clip.
I had the broken original old clip so i used this to messure and design the new one.
If u need a clip without a screw i can recommend this Thing:
https://www.thingiverse.com/thing:2781839
And if u need the other Thing this is the one i used:
https://www.thingiverse.com/thing:2787379
I use a washer and a screw that i found in our shed, but i unfortunately dont know which size it is.
Allsow the thread in the inside is without a use. The screw i used didnt fit in perfectly i needed a little bit of force to screw it in place, but it holds perfectly.
It takes around 1h and 40 min to print both things with 100% infill, with Raft and tree support generated with Cura on my Ender 3V2.
So thats all i hope u can enjoy my Design
Your Plombir Gang
Source description, under the recorded CC-BY-4.0 license.
Print instructions
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
Settings from the source; not independently tested by Orphaned Parts.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $17.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $18.00 | General-purpose candidate; heat and creep need review. |
| ASA | $18.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $18.50 | Enclosed printing; review application and dimensions. |
| TPU | $20.00 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $20.00 | Moisture, tolerances and application require review. |
| PA-CF | $21.00 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- fad48c18-dbf6-4be1-9ab2-07485378a2e6
- Part Name
- Warning Triangle Holder Clip
- Slug
- warning-triangle-holder-clip
- Category
- interior
- Cswp Approval Status
- pending
- Download Status
- approved
- Make
- Audi
- Model
- A4
- Year
- 2001
- Year End
- 2005
- Submodel
- Not supplied
- Engine
- Not supplied
- Created At
- 2026-05-05T07:33:34.09334+00:00
- Origin
- aggregated
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:4923807
- Source Creator Url
- https://www.thingiverse.com/AlexArmenia
- Cc License Code
- CC-BY-4.0
- Cc License Url
- https://creativecommons.org/licenses/by/4.0/
- For Sale
- No
- Fulfillment Mode
- platform
- Manual Price Cents
- Not supplied
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/fad48c18-dbf6-4be1-9ab2-07485378a2e6/images/warning-triangle-holder-clip-1_1777966415109_1zxamd.jpg
- Author
- AlexArmenia
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Detail Url
- https://3dcarparts.org/library/2001-2005/Audi/A4/warning-triangle-holder-clip
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.