Design by caveman69 · Original design · CC BY · Source details. Indexed via 3DCarParts. Source text and images remain credited to their creators; no modified design files supplied.
Designer source image. It may show an installed part, prototype or render; it is not an Orphaned Parts production sample.
WS6 Hood Grill
WS6 Hood Grill design listed for 1998–2002 Pontiac Firebird. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
- Make
- Pontiac
- Model
- Firebird
- Year range
- 1998–2002
- Submodel
- Trans Am WS6
- Engine
- Not supplied
Source approval status: Not supplied. Source flags do not certify fit, material suitability or safety for your vehicle.
License conditions, files, application and fit are reviewed before work is accepted.
Description
WS6 Hood Grill design listed for 1998–2002 Pontiac Firebird. Listed category: exterior. Verify dimensions, fitment and material suitability before printing.
A complete reusable description was not available in this import. Read the original design
Print instructions
No reusable print settings were imported. Check the source for orientation, supports, infill, tolerances and assembly instructions.
Print price estimates
Planning prices for one print, not a final quote. Defaults use a size allowance inferred from the part name, not a measured or sliced model. Filament suitability must be confirmed.
| Filament | USD / print | Application notes |
|---|---|---|
| PLA | $28.50 | Indoor prototypes; not a default material for hot vehicle interiors. |
| PETG | $29.00 | General-purpose candidate; heat and creep need review. |
| ASA | $32.50 | Candidate for UV exposure; verify temperature and geometry. |
| ABS | $31.50 | Enclosed printing; review application and dimensions. |
| TPU | $37.50 | Flexible designs only; not a substitute for rigid materials. |
| Nylon | $37.50 | Moisture, tolerances and application require review. |
| PA-CF | $42.50 | Filled nylon; abrasive filament and fit need review. |
Pricing assumptions and exclusions
USD: ($6 setup + $3 finishing + filament weight × assumed spool cost × 1.25 waste allowance + print hours × $2.50 × material time factor) ÷ 0.65. Rounded up to the next $0.50.
Assumed spool costs per kg: PLA $25, PETG $30, ASA $40, ABS $30, TPU $45, Nylon $65, PA-CF $95. Time factors: PLA/PETG 1.0, ASA/ABS 1.2, TPU 1.6, Nylon 1.4, PA-CF 1.5. These are proposed shop rates, not measured production costs.
Design work, test fitting, hardware, shipping and tax are additional where needed. Multi-file sets may need several prints. Use actual sliced weight and time when available. Final pricing is confirmed in writing.
All available source data
- Id
- source-thingiverse-6140931
- Part Name
- WS6 Hood Grill
- Image Url
- https://r2-upload.3dcarparts.workers.dev/file/parts/source-listing-56834/images/ws6-hood-grill-6678_1783581051765_jbnvgh.png
- Category
- exterior
- Download Status
- source_only
- Make
- Pontiac
- Model
- Firebird
- Year
- 1998
- Year End
- 2002
- Submodel
- Trans Am WS6
- Created At
- 2026-07-09T05:51:35.097637+00:00
- Origin
- source_index
- Source
- thingiverse
- Source Url
- https://www.thingiverse.com/thing:6140931
- Source Creator Url
- https://www.thingiverse.com/caveman69
- Cc License Code
- CC BY
- For Sale
- No
- Username
- Not supplied
- Author
- caveman69
- Estimated Price Cents
- Not supplied
- HasMultipleModelFiles
- No
- ModelFileCount
- 0
- Download Count
- 0
- Is Source Listing
- Yes
- Source Listing Status
- source_indexed
- Source License Family
- cc-by
- Source Match Confidence
- 0.88
- Source Classifier Status
- accept
- Detail Url
- https://3dcarparts.org/library/1998-2002/Pontiac/Firebird/
Source price fields and sale flags are metadata, not our selling prices. Their currency was not specified in the catalog. File counts do not mean files were downloaded or tested. No manufacturer savings or discontinued status is inferred.